Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
MOUNTING OPTIONS
WARNING: To reduce the risk of fire, electric shock or
personal injury, mount to outlet box marked "Acceptable
for fan support of 35 lb (15.9 kg) or less", and use
screws provided with the outlet box. An outlet box
commonly used for the support of lighting fixtures may
not be acceptable for fan support and may need to be
replaced. If in doubt, consult a qualified electrician.
If your ceiling fan does not have an existing UL-listed mounting
box, then install one using the following instructions:
□
Disconnect the power by removing the fuses or turning off
the circuit breakers.
□
Secure the outlet box directly to the building structure. Use
the appropriate fasteners and materials. The outlet box and
support structure must be securely mounted and capable of
reliably supporting 35 lb (15.9 kg). Use only UL Listed outlet
boxes marked "Acceptable for Fan Support of 35 lb (15.9 kg)
or less." Do not use a plastic outlet box.
The illustrations below show two different ways to mount the
outlet box.
Outlet Box
Outlet Box
To hang your fan where there is an existing fixture but no ceiling joist,
you may need an installation hanger bar as shown above
(available at any Home Depot store).
6
Hanger Bar
Outlet Box
Publicidad
