Descargar Imprimir esta página

Beper EL.103 Manual De Instrucciones página 11

Radio multibanda digital

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Digital Multibandradio - Use instructions
DESCRIPTION Fig. 1
1 Telescopic antenna
2 MODE button
3 SET button
4 TUNING control
5 VOLUME control
6 LCD display
7 POWER ON/OFF selector
8 Loudspeaker
9 SW Frequency range selector
Back side, not shown in the figure
Battery holder
Start-up of the device/Introduction
• Select a suitable location for the radio recorder, such as a dry, flat, non-
slip surface on which it is easy to operate the machine.
• Ensure that the radio recorder is sufficiently ventilated!
Inserting the Batteries (not supplied)
• Open the lid of the battery compartment on the back.
• Insert 2 batteries of type AAA/R03 1.5 V. Match the polarities correctly
(see the inside of the battery compartment)!
• Close the battery compartment again.
• If the device is not used for a long period of time, remove the batteries to
avoid the "spilling" of battery acid.
Different battery types or new and used batteries must not be used to-
gether.
• Batteries are not to be disposed of together with domestic wastes. Dispo-
se of the used batteries at the relevant collection bin or at your dealer's.
WARNING:
Do not expose the batteries to high temperatures or direct sunlight. Never
throw batteries into the fire. There is a danger of explosion!
Configuring the settings
Configure all settings with the MODE button. Change the currently se-
lected mode with the SET button
NOTE:
Push the SET button during the time display to show the following settings:
Set alarm time, date, and seconds. If you push the MODE button while the
seconds are shown, you can reset it to zero.
11

Publicidad

loading

Productos relacionados para Beper EL.103