Publicidad
Idiomas disponibles
Idiomas disponibles
Important
The rate of accidents deriving from the use
of appliances depends on many factors
which cannot always be foreseen and con-
trolled. Some accidents may be caused by
unpredictable environmental factors, while
others are due above all to the behaviour of
users. As well as receiving authorisation
and appropriate instruction, if necessary,
the first time they use the appliance, users
must carry out a few simulated practice op-
erations in order to get to know the controls
and the main functions.
The appliance is fitted with the controls for use
of its main functions.
A)Piezoelectric ignition button; lights the
burner pilot light.
B)Top burner control knob: turns on and off and
regulates the corresponding top burner
C)Heating element control knob: turns the heat-
IT
IT
ing element on, off and adjusts it.
GB
GB
Pilot light marker
Rear burner marker
DE
DE
Off marker
FR
FR
ES
ES
A
Minimum power marker
Full power marker
English
USE AND OPERATION
RECOMMENDATIONS FOR USE
DESCRIPTION OF CONTROLS
B
Use only as intended by the constructor
and never tamper with any device to obtain
performance levels outside the rated spec-
ifications.Before use, check that the safety
devices are properly installed and in good
working order. As well as taking care to
meet these requirements, users must also
implement all safety regulations and read
the description of the controls and the
start-up procedure carefully.
D)Power indicator: indicates the heating element
has been switched on.
E)Temperature indicator: indicates the hot cup-
board is warming up, switches off when the set
temperature is reached.
C
D
E
Temperature marker
- 8 -
B
E
B
A
B
A
IDM-39612500500.tif
4
D
C
Publicidad
