Publicidad
Idiomas disponibles
Idiomas disponibles
Translation of the Original
GB
Operating Instructions
PROXXON WAS/E cylinder
sander
Dear customer!
Always keep these operating instructions and
the enclosed safety guidelines within reach.
Only use this device with exact knowledge of
it and comply with the instructions and safety
guidelines!
This is necessary to ensure safe operation and,
secondly, it facilitates familiarisation with the
device and its functions.
Proxxon assumes no liability for the safe func-
tion of the device in the case of:
• handling that does not comply with normal
intended use,
• use for other purposes not mentioned in the
manual,
• incorrectly executed repairs,
• failure to heed safety instructions,
• external effects for which the manufacturer is
not responsible.
We recommend using PROXXON original spare
parts for all repair and maintenance work.
Repairs should only be performed by qualifi ed
skilled personnel!
Please note: All information contained in these
operating instructions - especially the technical
data - corresponds to the status at the time of
printing.
We reserve the right to make further develop-
ments in the interest of technical progress. We
wish you every success with the device.
WARNING!
Read all safety warnings and instruc-
tions. Failure to follow all safety war-
nings and instructions listed below may result in
electric shock, fi re and/or serious injury.
KEEP ALL SAFETY WARNINGS AND INSTRUC-
TIONS FOR THE FUTURE !
Hold the device by the insulated gripping
surfaces, as the grinding surface can hit its
own connecting cable. Damage to a "live"
wire can stress metal parts and cause an elec-
tric shock.
For use in dry environments only
Protection class II device
Please do not dispose off the
machine!
Wear safety glasses!
For your safety, always wear hearing
protection while working!
1 Key (Fig. 1)
1. Gear head
2. Rating plate
3. Motor housing
4. Speed control knob
5. Lock button
6. Grip
7. Grinding cylinder
8. Connecting cable
9. ON - OFF switch
10. Hook
2 Description of the device
The WAS/E cylinder sander is the ideal device
both for fi ne-fi nishing surfaces by sanding,
brushing and satin-fi nishing and for cleaning
non-ferrous metals, steel and stainless steel.
It is also suitable for reworking chamfers and
curves.
Note!
- 9 -
Publicidad
