Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Oil level
The level in the reservoir should not be allowed to fall below
a quarter full.
Saw chain and guide bar
After every few hours of use and before storage,
u
remove the guide bar and the saw chain and clean them
thoroughly.
Make sure that the guard is clean and free from debris.
u
Oil sprocket nose and chain bar via the sprocket
u
lubrication holes. This ensures an even distribution of
wear around the guide bar rails.
Saw chain sharpening
If you are to get the best possible performance from the tool it
is important to keep the teeth of the saw chain sharp.
Guidance for this procedure is found on the sharpener
package.
Replacing worn out saw chains
Replacement saw chains are available through retailers or
STANLEY FATMAX service agents. Always use genuine spare
parts.
Saw chain sharpness
The saw chain cutters will blunt immediately if they touch the
ground or a nail while cutting.
Saw chain tension
Regularly check the saw chain tension.
What to do if your chainsaw needs repair?
Your chainsaw is manufactured in accordance with the
relevant safety requirements. Repairs should only be carried
out by a qualified person using original spare parts otherwise
this may result in considerable danger to the user. We
recommend you keep this user manual in a safe place.
Protecting the environment
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be recov-
ered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries accord-
ing to local provisions. Further information is available at
www.2helpU.com
18
(Original instructions)
Technical data
Voltage
V
DC
Bar length
mm
Chain speed (No-load)
m/s
Max cutting length
mm
Oil capacity
ml
Weight
kg
2.51
Charger
SFMCB11
Input Voltage
V
AC
Output Voltage
V
DC
Current
A
Battery
SFMCB201
Voltage
V
18
DC
Capacity
Ah
1.5
Type
Li-Ion
Level of sound pressure according to EN 62841:
L
(sound pressure) 87 dB(A), Uncertainty (K) 3 dB(A)
pA
L
(sound power) 99 dB(A), Uncertainty (K) 1.6 dB(A)
WA
Vibration total values (triax vector sum) according to EN 62841:
Vibration emission value (a
Supply of Machinery (Safety)
Regulations 2008
SFMCCS730 – Compact Chainsaw
STANLEY FATMAX declares that these products described
under "technical data" are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN 62841-1:2015+A11:2022, EN 62841-4-1:2020.
The Noise Emission in the Environment by Equipment for use
Outdoors Regulations 2001, S.I. 2001/1701 (as amended).
Schedule 8.
LWA (measured sound power level) 99 dB(A), uncertainty (K)
= 1.6 dB (A),
LWA (guaranteed sound power) 101 dB(A).
These products conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016,
S.I.2016/1091 (as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
SFMCCS730
(without the saw chain, guide bar, guide bar cover, oil, battery)
SFMCB12
SFMCB14
230
230
18
18
1.25
2
SFMCB202
SFMCB204
SFMCB206
18
18
2.0
4.0
Li-Ion
Li-Ion
2
2
) 6.5 m/s
, uncertainty (K) 1.5 m/s
h
18
300
6.7
250
150
230
18
4
18
6.0
Li-Ion
Publicidad
