Maxx Cold SELECT Serie Manual De Instrucciones página 6

IMPORTANT SAFEGUARDS (cont.)
Electrical Connection
Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For personal
safety, this appliance must be properly grounded. The power cord of this appliance is equipped with a 3-prong
grounding plug that mates with a standard 3-prong grounding wall outlet to minimize the possibility of electric
shock hazard from the appliance. Have the wall outlet and circuit checked by a qualified electrician to make sure the
outlet is properly grounded. The freezer should always be plugged into its own individual electrical outlet which has
a voltage rating that matches the rating label on the appliance. This provides the best performance and also
prevents overloading house wiring circuits which could cause a fire hazard from overheated wires. Repair or
replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows
cracks or abrasion damage along its length or at either end. When moving the freezer, be careful not to damage the
power cord.
Refrigerant Disposal
If you are throwing away your old freezer it may have a cooling system that uses "Ozone Depleting" chemicals. Make
sure the refrigerant is removed for proper disposal by a qualified service technician.
Page 6 of 58