Publicidad
Idiomas disponibles
Idiomas disponibles
Tip
Carry out the self-cleaning cycle once every 2 weeks. If water in your area is very hard (i.e.,
limescale appears on the soleplate during ironing), the self-cleaning function should be used
more frequently.)
Auto shut-off function
-
The iron will automatically turn off when it is placed and kept still horizontally for 30
seconds, or vertically for 8 minutes. The device will beep 6 times and the LED light indicator
will flash to indicate the iron is off.
-
To heat the iron up again:
-
Pick up the iron or gently move it.
Anti-drip function
-
This function automatically prevents water from spilling when the appliance is not hot
enough.
-
During use, the anti-drip system may emit a loud clicking sound, especially during
preheating or whilst cooling down. This is perfectly normal and indicates that the system
is operating correctly.
Anti-calc system
This system is designed to reduce the building up of limescale due to steam ironing.
4. CLEANING AND MAINTENANCE
-
Turn off, unplug the appliance from the power supply, empty the water tank (do it after
each use), and allow it to cool down completely.
-
In case fabric is adhered to the soleplate due to heat, use a damp cloth and vinegar to
detach it.
-
Do not use abrasive cleaners or scouring pads to clean the product.
-
If scale blocks the steam holes, use a toothpick to remove it.
-
To protect the soleplate while it is stored, place the steam iron in an upright position on
its heel rest.
Exterior iron surface
After unplugging and letting the iron cool down, wipe its exterior surface with a damp cloth
and, if necessary, a mild detergent.
Warning
Do not use any abrasive cleaning agent.
Soleplate
Starch and other types of residues may be easily removed from the soleplate with a damp
cloth. Do not use nickel balls to clean the soleplate or place the iron on rough surfaces to
IRONHERO 3200 I-PUMP ANODIZED
ENGLISH
43
Publicidad
