Descargar Imprimir esta página

cecotec PUMBA 6000 PURRFECT MEAL SMART VISION Manual De Instrucciones página 5

Comedero automático para mascotas con control wifi y cámara
Ocultar thumbs Ver también para PUMBA 6000 PURRFECT MEAL SMART VISION:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 18
base before cleaning or maintenance operations.
- Unplug the feeder every time you handle it.
- The feeder must not be used outdoors.
- If the cable or plug of the dispenser is damaged, the appliance
must not be used.
- If the plug gets wet, turn off the power at the socket to which
it is plugged in and unplug it.
- Make sure the plug is not wet. The power socket should be
located higher than the location of the feeder.
- Do not use the product if it is malfunctioning or damaged. Do
not attempt to repair this product yourself, please contact
the Technical Support Service.
- Responsible use:
- Cleaning and user maintenance should not be carried out by
unsupervised children.
- Do not allow pets to chew or swallow any part of the
product. To avoid problems, you can pass the cable through
a resistant conduit.
- Do not install or store this product in locations that are
exposed to precipitation and/or temperatures below 4 °C.
- Frequently check the amount of food in the compartments
to ensure that the feeder is dispensing food correctly.
- Monitoring and training:
- This appliance can be used by children aged 8 years and
above and people with reduced physical, sensory, or mental
capabilities or lack of experience and knowledge if they
have been given supervision or instruction concerning use
of the appliance in a safe way and understand the hazards
involved. Children must not play with the appliance.
- If you have visitors to your home, be sure to provide them
with information about the automatic feeder and how to
interact with it safely, especially if they have pets of their
own.
8
PUMBA 6000 PURRFECT MEAL SMART VISION
- When introducing your pets to the automatic feeder for the
first time monitor their initial interaction to make sure they
adapt and understand the feeding process safely.
- If you are introducing your pets to the feeder for the first
time, use a gradual training process to get them used to the
device before leaving it running unsupervised.
- If you have pets with aggressive or playful behaviour,
consider additional training to ensure that the automatic
feeder is not subject to nibbling or hitting.
- Operation and maintenance:
- Checking loose parts: before each use, check that all parts
and components of the feeder are securely fastened and in
place, avoiding any risk of accidental ingestion by pets.
- Appropriate food: only use manufacturer's recommended
dry food to prevent clogging of the feeder mechanism and
to ensure that pets receive adequate nutrition.
- Clean the feeder at least once a week.
- Conduct regular inspections of the feeder, ensuring that
moving parts are functioning properly and that there is no
build-up of food debris that could affect performance.
- Regular maintenance: In addition to weekly cleaning,
perform more thorough maintenance at least once a month
to ensure optimal long-term performance.
- Timely replacement of worn parts: If you notice signs of
wear on parts of the feeder, such as the lid or dispenser tray,
replace them immediately to avoid potential safety hazards.
- Batteries:
- Requires 4 "AA" batteries. Batteries are NOT included. Only
use alkaline batteries.
- Check the low battery indicator light frequently to ensure
that the feeder has battery.
- You must remove the batteries from the device before
disposing of it.
PUMBA 6000 PURRFECT MEAL SMART VISION
9

Publicidad

loading

Este manual también es adecuado para:

09566