Beper 40.989 Manual De Instrucciones página 9

Hair Brush Use instructions
DESCRIPTION OF APPLIANCE [fig. 1]
Refer to Figure [1] in the illustrative guide to verify your appliance equipment.
1 Button to release the accessories
2 0-1-2 button
3 Cool air shot
4 Air nozzle
5 Curling iron
6 Small round heating brush
7 Big round heating brush
8 Concentrator
For the appliance features, refer to the external packaging.
To be used only with the accessories supplied.
USE OF ACCESSORIES
The device is provided with the accessories described above.
The accessory is applied by pressing on the front part until it is inserted. When finished using it, the
accessory can be removed by pulling it firmly.
USEFUL ADVISE
• Experience in the various applications of the air styler, matured over time, allows you to establish
the time required for the desired straight effect according to your type of hair.
• Before using the appliance, make sure the hair is dry, clean and without any trace of hairspray,
hair mousse or gel.
• Start from the nape of the neck, proceed on the sides and finish on the forehead.
• When using the styler or while it is heating or cooling, place the appliance on a smooth and heat
resistant surface.
• When creating the hairstyle, be careful not to bring the air styler close to sensitive parts of the face,
ears, neck or skin.
Warning:
After having finished using the styler, make sure it has completely cooled down before put-
ting it away. Never wrap the power supply cord around the appliance.
PREPARING THE HAIR
• Wash and comb the hair, removing knots.
• Dry the hair, leaving them slightly damp.
OPERATION
This styler works with air, which means it works according to the same principle of a common hair
dryer: the hot air exits from the main casing and passes through the slots of accessories.
9