Tognana D2DBL50IRRO Manual De Usuario página 15

IMPORTANT NOTE:
•
Do not press too hard on the weighing platform when replacing the batteries.
•
It is recommended to remove the batteries if the product is not used for long periods.
OVERLOAD INDICATOR
1. If the product is overloaded (more than 5 Kg), "O-Ld" appears on the display.
2. Immediately remove the excess weight to avoid damaging the scale.
3. Select the unit of measure (lb/g/oz/fl'oz/oz/ml) by pressing the UNIT key.
4. Proceed with weighing.
TARE/WEIGHING FUNCTION
1. Turn the product on.
2. Place the food or container on the weighing platform.
To exclude the container weight, press the "ON/TARE" key. "0" will appear on the display.
3. Place the food to be weighed in the container. The measured weight will then appear on the display.
NB: If the bowl or other container is placed on the platform BEFORE the scale is turned on, this weight is
automatically excluded by the appliance.
NEGATIVE TARE
The tare is displayed as a negative value when the entire weight is removed from the scale (including the
container).
CLEANING AND MAINTENANCE
1. Cleaning
Clean the platform with a slightly damp cloth.
HAZARD! Do not place in the dishwasher or submerge in
liquids.
IMPORTANT NOTE
abrasive detergents for cleaning.
2. Storage
If the appliance is not to be used for long periods, it is recommended to remove the batteries before storing
it away.
: do not use chemical detergents, steel wool or
15