Salicru SPS.ADVANCE RT2 Manual De Usuario página 39

2. SAFETY INFORMATION.
2.1. USING THIS MANUAL.
The documentation of any standard equipment is available to the
customer on our website for download (www.salicru.com).
For devices "powered by socket", this is the website for
•
obtaining the user manual and
EK266*08.
For devices with "permanent connection" via terminals, a pen
•
drive containing all necessary information for connection and
start-up, including
supplied with it.
Before carrying out any action on the device relating to its
installation or start-up, change of location, configuration or
handling of any kind, carefully read the safety instructions.
The purpose of the user manual is to provide information regarding
safety and explanations of the procedures for installation and
operation of the equipment. Read them carefully and follow the
steps indicated in the order established.
Compliance with the "Safety Instructions" is
mandatory and the user is legally responsible
compliance and enforcement.
The equipment is delivered properly labelled for the correct
identification of each of the parts, which together with the
instructions described in this user manual allows the operations
of installation and commissioning to be performed in a simple and
orderly manner without having any doubts whatsoever.
Finally, once the equipment is installed and operating, it is
recommended to save the documentation downloaded from the
website, Pen Drive in a safe and easy-to-access place, for any
future queries or doubts that may arise.
The following terms are used interchangeably in the document to
refer to:
«SPS ADVANCE RT2, ADVANCE RT2, ADV RT2, RT2,
•
equipment, unit or
system.
Depending on the context of the phrase, it can refer either
to the actual UPS itself or to the the UPS and the batteries,
regardless of whether it is all assembled in the same metal
casing - box - or not.
"Batteries or accumulators".- Group or set of elements that
•
stores the flow of electrons by electrochemical means.
'T.S.S.' - Technical Service and Support.
•
'Client, installer, operator or user'
•
interchangeably and by extension to refer to the installer and/or
operator who will carry out the corresponding actions, and the
same person may be responsible for carrying out the respective
actions when acting on behalf of, or in representation of, same.
USER MANUAL
"Safety Instructions"
"Safety Instructions"
EK266*08, may be
UPS».- Uninterruptible power supply
- These are used
2.1.1. Conventions and symbols used.
Some symbols may be used and appear on the equipment,
batteries and/or in the context of the user manual.
For more information, see section 1.1.1 of document EK266*08 on
"Safety instructions".
for
SPS.ADVANCE RT2 UNINTERRUPTIBLE POWER SUPPLY (UPS)
39