Publicidad
READ AND FOLLOW ALL INSTRUCTIONS
BEFORE INFLATING OR USE
BEFORE INFLATING WITH BUILT-IN FOOT PUMP
• Spread the air bed out on a flat surface. Make sure this surface is free
of stones or others sharp objects which might puncture the air bed.
• The built-in air pump inflation valve
• Make sure that the insert plug is properly positioned and the 2 in 1
exhaust valve
cap is securely tightened.
2
TO INFLATE USING THE BUILT-IN FOOT PUMP
• Remove the air pump inflation valve cap and insert plug
cap and plug to reattach after inflation.
• Locate and spread the built-in foot pump out to ensure the foot pump
surface is flat and straight.
• Placing your foot directly over the inflation valve opening, push firmly
down
. This will push air from the air pump chamber into the bed.
3
• Release your foot
so the air pump chamber will re-fill with air for
4
the next cycle.
• Repeat until desired firmness is achieved.
• Replace the air pump inflation valve insert plug and cap
TO INFLATE USING AN EXTERNAL AIR PUMP
• Make sure the air pump inflation valve
positioned and the 2 in 1
• Pull 2 in 1
valve cap to open.
2
• Insert the nozzle from an air pump into the 2 in 1
• Inflate the product to approximately 80% of desired firmness.
CAUTION: To prevent bursting, do not over inflate or use high
pressure air compressor.
• Close 2 in 1
valve cap securely after inflation.
2
TO DEFLATE
• Pull out 2 in 1
valve cap.
2
• Pull inflation valve base to release air.
CAUTION: When opening, point the exhaust valve away from
any person.
• Replace inflation valve base and cap securely.
IMPORTANT
Air inside of bed may expand and contract with varying temperature
leading to reduce pressure inside of the bed. If this occurs, simply
add more air using the pump to achieve desired firmness. If
puncture occurs, please refer to instruction. Repair kit/patch is
enclosed.
–––– SAVE THESE INSTRUCTIONS ––––
©2022 Intex Marketing Ltd. - Intex Development Co. Ltd. - Intex Recreation Corp. All rights reserved/Tous droits réservés/Todos los derechos reservados/Alle Rechte
vorbehalten. Printed in China/Imprimé en Chine/Impreso en China/Gedruckt in China.
®™ Trademarks used in some countries of the world under license from/®™ Marques utilisées dans certains pays sous licence de/Marcas registradas utilizadas en algunos países
del mundo bajo licencia de/Warenzeichen verwendet in einigen Ländern der Welt in Lizenz von/Intex Marketing Ltd. to/à/a/an Intex Development Co. Ltd., Hong Kong & Intex
Recreation Corp., P.O. Box 1440, Long Beach, CA 90801 • Distributed in the European Union by/Distribué dans l'Union Européenne par/Distribuido en la unión Europea por/
Vertrieb in der Europäischen Union durch/Intex Trading B.V., Ettenseweg 46, 4706 PB Roosendaal – The Netherlands • Distributed in the UK by Unitex Service (UK) Limited,
21 Holborn Viaduct, London EC1A 2DY, UK.
www.intexcorp.com
INTEX
®
OWNER'S MANUAL
BUILT-IN FOOT PUMP
must face up.
1
insert plug is properly
1
exhaust valve cap is securely tightened.
2
2
(15IO) INSTRUCTION SHEET SIZE: 7.5" X 10.3" 04/18/2022
1
. Save the
1
.
1
inflation valve.
2
15
English
IO
2
3
4
INFLATE
DEFLATE
015-*IO-R0-2304
Publicidad
