Sharp RT-350H Manual De Manejo página 4

PRECAUTIONS
BE CERTAIN THAT THE AC VOLTAGE SELECTOR IS SET
TO CORRESPOND WITH THE POWER SUPPLY IN THE
AREA BEFORE THE UNIT IS PLUGGED IN.
Failure to do so may result in damage to the unit or accidents such as
electrical fires, etc.
ALWAYS GRIP THE PLUG WHEN REMOVING THE AC
SUPPLY LEAD FROM THE OUTLET.
Pulling the plug from the outlet by gripping the lead may cause
damage to the Jead or be the cause of a fire or accidental electrical
shock,
DO NOT PLACE ANY HEAVY OBJECTS ON THE AC SUPPLY
LEAD.
DO NOT BEND THE AC LEAD IN AN ACUTE ANGLE. DO
NOT PLACE THE LEAD WHERE PEOPLE WILL STEP OR
WALK ON THEM.
This will cause the lead to break or short causing fire or electrical
shock.
DO NOT USE OR LEAVE THE UNIT IN AHIGH HUMIDITY
AREA.
This will cause the unit to malfunction or cause electrical shock.
DO NOT EXPOSE THE UNIT TO HIGH TEMPERATURES,
E.G., DIRECT SUNLIGHT OR NEAR HEATERS. |
This will cause the plastic parts to warp and thus cause the unit to
malfunction.
DO NOT USE OR LEAVE THE UNIT IN A DUSTY AREA.
This will cause reduction in sound quality and cause the unit to
malfunction.
DO NOT EXPOSE
TEMPERATURES.
This will cause the unit to function improperly.
THE UNIT TO EXTREME COLD
WHEN CHOOSING A LOCATION FORTHE UNIT, SELECTA
SOLID LEVEL PLACE.
Be careful not to allow the unit to fall.
DO NOT REMOVE THE CABINET.
WARNING:
Always remove mains plug from wal! socket, when notin use, or
before service operation. Never remove covers unless qualified
to do so; this unit contains dangerous voltages.
NOTE:
When the POWER switch is set atc) STAND-BY position, the unit
is on stand-by, which means that mains voltage is still present
inside the unit. Accordingly, be sure to pull the mains plug out of
the wall outlet before making any internal examination or repairs,
[E] 2