Rear Brake Pedal Position Adjustment - Husqvarna TE 630 2011 I.E. Manual De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

REAR BRAKE PEDAL POSITION ADJUSTMENT

The position of the rear brake pedal with respect to the
footrest may be adjusted according to the individual
needs.
For adjusting, proceed as follows.
- loosen the screw (1);
- turn the cam (2) in order to raise or lower the brake
pedal (3) within the range available (A);
- the operation done, tighten the screw (1). Once this
adjustment is completed, adjust the free play of the
pedal as follows.
3
REAR BRAKE PEDAL FREE PLAY ADJUSTMENT
The rear brake pedal (3) should have a free play (B) (0.2
in.) before the brakes begin to bite.
Should this not happen, operate as follows:
- loosen nut (4);
- operate the pump rod (5) to increase or decrease the
free play;
- tighten nut (4) at the end of the operation.
2
5
4
1
A
WARNING*:
When the free play requirement is not
met, the brake pads will be subjected
to an early wear that may lead to TOTAL
BRAKE INEFFECTIVENESS.
B
3
EN - 29

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Sms 630 2011 i.e.

Tabla de contenido