VOLTWERK SmartConnect 8 Instrucciones De Servicio página 110

NOTICE
Result
SmartConnect
Operating manual
Material damage can be caused by incorrect fitting.
Incorrect installation can cause the terminals to become twisted or
deformed.
Move the terminal opener with caution
|
4. Insert the terminal opener into the rectangular opening.
5. Move the terminal opener backwards.
The terminal is open.
6. Insert the string plus connection into the designated terminal. Note the
following:
the cable is completely inserted into the plastic body of the
|
terminal.
the cable must not protrude from the terminal, and it must not be
|
possible to view or contact any bare copper.
7. Remove the terminal opener from the terminal.
The string plus connection is secured in the terminal.
8. Retighten the metric connecting screws (tightening torque 2 Nm).
9. Repeat the procedure for the string minus connection.
The string plus cable and the string minus cable are connected.
5 Installation
33