General safety instructions
Usage of hedge trimmer always involves a
risk of accidents, therefore please observe
the relevant accident prevention instruc-
tions.
The machine has been constructed according
to the latest technology and in accordance with
the recog-nised technical safety regulations.
Nevertheless, use of the machine can involve
risks to the user or third persons, and can cause
damage to the machine or other objects.
Attention: Using electric power tools, you must
observe following fundamental safety instruc-
tions to protect yourself against electric shock,
against danger of injuries and danger of fire.
Read all these instructions before using the
hedge trimmer and observe them. Keep these
safety instructions at a safe place.
Use the machine in a safety conscious manner
for suitable applications in a technically perfect
condition only and with due regard to the oper-
ating instructions! Immediately rectify or have
rectified any faults which could adversely affect
safety!
This machine may cause serious injuries. Please
read the instruction manual carefully as to the
correct handling, the preparations, the mainte-
nance and the proper use of the hedgetrimmer.
Familiarize your-self with the machine before
the first use and also have yourself introduced
to practical use of the machine.
This appliance is not intended for use by per-
sons (including children) with reduced physical,
sensory or mental capabilities, or lack of experi-
ence and knowledge, unless they have been
given supervision or instruction concerning use
of the appliance by a person responsible for
their safety.
Children should be supervised to ensure that
they do not play with the appliance.
Read and understand the operating instructions
before using the appliance. Familiarise with the control
elements and how to use the appliance properly. Abide
by all the safety measures stated in the service manual.
Act responsibly toward third parties.
The operator is responsible for accidents or risks to third
parties.
In case of any doubts about connection and operation
refer please to our customer center
GB | Operating Instructions
General Power Tool Safety Warnings
provided with this power tool. Failure to follow all
instructions listed below may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term „power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
KEEP THESE INSTRUCTIONS CAREFULLY!
1) Work area safety
a) Keep work area clean and well lit. Cluttered or
b) Do not operate power tools in explosive
c) Keep children and bystanders away while
2) Electrical safety
a) Power tool plugs must match the outlet. Never
b) Avoid body contact with earthed or grounded
c) Do not expose power tools to rain or wet
d) Do not abuse the cord. Never use the cord for
e) When operating a power tool outdoors, use an
f) If operating a power tool in a damp location is
3) Personal safety
a) Stay alert, watch what you are doing and
GB-3
WARNING Read all safety warnings,
instructions, illustrations and specifica tions
dark areas invite accidents.
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
operating a power tool. Distractions can cause
you to lose control.
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
conditions. Water entering a power tool will
increase the risk of electric shock.
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk
of electric shock.
use common sense when operating a power
tool. Do not use a power tool while you are