Pioneer GR-777 Manual De Instrucciones página 7

CON N ECTIONS -Refer to the illustration [A] page 2 and on page 3.
Turn off all power switches on all components before making
connections.
The illustration shows connections for a typical system using Pioneer
components. Refer to operating instructions of each unit for details.
" Connect GR-777 EQUALIZER INPUT jacks to the stereo amplifier
ADAPTOR OUT (or ADAPTOR/TAPE2 etc.) jacks.
Connect GR-777 EQUALIZER OUTPUT jacks to the stereo amplifier
ADAPTOR IN (or ADAPTOR/TAPE2 etc.) jacks.
Fig [A] on page 2
@) Tape deck (Tape deck 2)
@ EQUALIZER jacks
@) Accessory cord provided with the tape deck
@) TAPE jacks
Accessory cord provided with GR-777
® 'Power cord
@ Stereo amplifier
Power plug
© AC wall socket
Fig on page 3
@ Tape deck
@ Accessory cord provided with the tape deck
@) EQUALIZER jacks
@) TAPE jacks
©) Accessory cord provided with GR-777
© Stereo amplifier
@ Power cord
® Power plug
@) AC wall socket
ADAPTOR jack
és
©)
~
[Tape Deck Connections]
Connect the GR-777 TAPE REC jacks to the tape deck REC [INPUT]
jacks.
Connect the GR-777 TAPE PLAY jacks to the tape deck PLAY
[OUTPUT] jacks.
[Optional System Control Connections]
Pioneer components bearing the CR | mark can be connected for
extended remote control. Use a miniature phone plug cord to connect
the component CONTROL IN terminal to the GR-777 CONTROL OUT
terminal. The component remote contro! can then be operated pointing
at the GR-777 remote sensor window.
PANEL AND REMOTE CONTROL UNIT FACILITIES -reter to the itustration [€]
on page 4 and [D]on page 5.
REAR PANEL FACILITIES
@ EQUALIZER jacks
Connect these jacks to your amplifier tape or adaptor jacks.
@ TAPE jacks
Connect a tape deck to these jacks.
@) AC OUTLET (UNSWITCHED 100W MAX)
Other units may be plugged into this outlet if total power consumption
does not exceed 100 watts. Power is always available even if the
equalizer is switched off.
Unplug the AC power cord from the wall socket when not using this
* unit regularly (when on vacation).
NOTE:
Do not use this outlet for connection of electric irons, heaters, TV sets,
"or other appliances that use much power. Malfunction of the equalizer
and overheating or fire may result.
@ Power cord
Connect to auxiliary AC outlet on amplifier.
® CONTROL OUT terminals
Connect to the control in terminals of other Pioneer components bearing
the Gal mark.
FRONT PANEL FACILITIES
© POWER switch/indicator
Press once to turn on. Press again to turn off.
The indicator lights when power is turned on. The indicator flashes when
receiving commands from the remote control unit.
Even when the power switch is off, the transformer remains connected
to the AC power source. Unplug the AC power cord from the wall
socket when not using this unit regularly.
@) SPA (spectrum analyzer) switch
Press to switch to spectrum analyzer display. Graphic equalizer display
reappears for five seconds when a memory recall switch or control
switch is pressed.
EQ (equalizer) switch
Press to switch to graphic equalizer display.
@ TAPE MONITOR switch
For listening to a tape deck connected to the rear panel TAPE jacks.
During playback, press this switch so that the MONITOR indicator lights.
Turn this switch off when listening to other music sources.
Do not press this switch after you begin recording; it may cause gaps
in the sound.
EQ (Equalizer) indicator
Lights when the EQ switch is pressed.
7
<ARE1098>