PowerA LUMECTRA 1522807-01 Manual De Usuario página 9

TROUBLESHOOTING
For latest FAQs and support with your authentic PowerA accessories, please visit
Q. Why is my wireless controller not pairing?
A. Confirm the battery is charged by connecting the controller to the console with the supplied USB-C Cable.
A. Confirm you are following the pairing process. The controller can only be paired to one Nintendo Switch
system at a time.
A. Use a paper clip to press the reset button on the back of the controller and reset the controller to factory
settings.
Q. Why are my sticks scrolling/drifting?
A. It is important that when the controller is paired or reconnected to the Nintendo Switch system that the
sticks are not touched. If this happens, turn the controller off by pressing the SYNC button once, then
turning it back on by pressing the HOME button without touching the sticks.
A. Make sure the controller battery is not depleted.
Q. Why don't the motion controls work on my controller?
A. Make sure that your Nintendo Switch system version is 6.0.1 or later.
A. Turn the controller off by pressing the SYNC button once and turn it back on by pressing the HOME button
without touching the sticks.
Q. Why is the Lumectra lighting off for a single zone?
A. The brightness may be set to 0% for that zone. Use +Control Pad up in Lumectra program mode to turn the
brightness up for that zone or ZR to turn the brightness up for all zones.
A. The lighting may have been turned off for a single zone. Enter Lumectra program mode and select the zone
that is off by using +Control Pad right. Once on the selected zone, press the LEDS button once.
9
WARRANTY
2-Year Limited Warranty: Visit PowerA.com/Support for details .
PowerA.com/Support.
WARRANTY AGAINST DEFECTS, AUSTRALIA & NEW ZEALAND CUSTOMERS
This product is provided with a 2-year warranty against defects in manufacturing or materials from the date of
purchase. ACCO Brands will either repair or replace a faulty or defective product subject to the conditions of this
warranty. Claims under this warranty must be made to the place of purchase within the warranty period with proof
of purchase by the original purchaser only. Expenses associated with a warranty claim are the responsibility of the
consumer. Conditions of this warranty are on our website: PowerA.com/warranty-ANZ
This warranty is provided in addition to other rights or remedies available to you under the law. Our goods come with
guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for
a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the
goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
DISTRIBUTOR CONTACT DETAILS
AUSTRALIAN CUSTOMERS:
ACCO Brands Australia Pty Ltd, Locked Bag 50
Blacktown BC, NSW 2148
Phone: 1300 278 546
Email: consumer.support@powera.com
BATTERY WARNING
• Do not attempt to repair the Li-ion battery yourself—you may damage the battery, which could cause
• The Li-ion battery in your device should be serviced or recycled by PowerA or an authorized provider and must be
• Dispose of batteries according to your local environmental laws and guidelines.
• Do not use or leave the product containing rechargeable batteries exposed to very high or very low temperature
NEW ZEALAND CUSTOMERS:
ACCO Brands New Zealand Limited
PO Box 11-677, Ellerslie, Auckland 1542
Phone: 0800 800 526
Email: consumer.support@powera.com
overheating, fire, and injury.
recycled or disposed of separately from household waste.
(e.g. at strong direct sunlight or in a vehicle in extremely hot or extremely cold weather), or in an environment