Eaton TRIPP LITE Serie Manual Del Propietário página 5
Divisores hdmi 4k
Ocultar thumbs
Ver también para TRIPP LITE Serie:
- Manual del propietário (140 páginas) ,
- Manual del usuario (96 páginas) ,
- Manual de instalacion y uso (78 páginas)
Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
3.
Connect an available Output port on the splitter to the HDMI input port of
your display.
Note: The length of the HDMI cable connecting the splitter to the display must not exceed 23 ft. (7 m).
4.
Repeat step 3 for the remaining Output ports on the splitter.
5.
Connect the included power supply to the splitter, then plug it into a Surge
Protector, Power Distribution Unit (PDU), or Uninterruptible Power Supply (UPS).
6.
Turn on the power to the HDMI source, splitter and displays.
Cascade Installation
The number of connected monitors can be expanded by cascading up to three
levels of splitters together. Up to 512 displays can be connected by cascading a
B118-008-UHD from each port in a three-level installation. It is recommended you
use P569-XXX-CERT Series Premium High-Speed HDMI cables.
1.
Make sure the power to all the devices you will be connecting is turned off.
2.
Connect the HDMI source to the Input port on the first-level splitter.
Note: The length of the HDMI cable connecting the source to the splitter must not exceed 16 ft.
(5 m).
3.
Connect an available Output port on the first-level splitter to the HDMI Input
port on a second-level splitter.
Note: The length of the HDMI cable connecting the first and second level splitters must not
exceed 10 ft. (3 m).
4.
Repeat Step 3 for each additional splitter you wish to add (no more than three
levels of splitters can be cascaded).
5.
Connect an available Output port on your splitter(s) to the display's HDMI
Input port.
Note: The length of the HDMI cable connecting the splitter to the display must not exceed
16 ft. (5 m).
6.
Repeat Step 5 for the remaining Output ports in the installation.
7.
Connect the included power supply to each splitter in the installation, then
plug it into a Surge Protector, Power Distribution Unit (PDU) or Uninterruptible
Power Supply (UPS).
8.
Turn on the power to the HDMI source and displays.
07-727-9336A7.indb 5
07-727-9336A7.indb 5
5
3/4/2024 4:25:24 PM
3/4/2024 4:25:24 PM
Publicidad
