EN
9
OPERATION
Before you operate the machine, read and understand the
safety regulations and the operation instructions.
Be careful when you operate the machine.
9.1
START THE MACHINE
1. Push the lock-out button (3) and pull the trigger (4).
3
2. Push the speed switch (5) to the desired operating speed.
Push the speed switch to position 1 for low speed or
position 2 for high speed.
9.2
STOP THE MACHINE
1. Release the trigger to stop the machine.
9.3
OPERATION TIPS
Keep clearance between the body and the machine.
Do not operate the machine without guard in place.
Do these tips when you use the machine:
•
Keep a firm hold with two hands on the machine while
you operate the machine.
1
IMPORTANT
WARNING
5
WARNING
WARNING
English
•
Cut tall grass from the top down.
If grass winds around the trimmer head:
•
Remove the battery pack.
•
Remove the grass.
9.4
CUTTING TIPS
•
Tilt the machine toward the area to be cut (B). Use the tip
of the cutting line to cut grass.
4
•
Move the machine from right to left to prevent thrown
debris from hitting the operator.
•
Do not cut in the danger area (C).
•
Do not force the trimmer head into uncut grass.
•
Wire and picket fences cause cutting line wear and
breakage. Stone and brick walls, curbs, and wood can
wear the cutting line quickly.
A
B
8
11
C