Hilti SFD 2-A Manual De Instrucciones página 13

4 Technical data
4.1 Technical data
Rated voltage
Weight
Speed in 1st gear
Speed in 2nd gear
Torque
Torque (drill symbol)
4.2 Battery
Battery operating voltage
Ambient temperature
Storage temperature
Charging temperature
5 Operation
5.1 Inserting/removing the battery
CAUTION
Risk of injury. The drill/driver may start inadvertently.
▶ Before fitting the battery, check that the drill/driver is switched off and
that the switch safety lock is activated.
CAUTION
Electrical hazard. Dirty contacts may cause a short circuit.
▶ Before inserting the battery, check to ensure that the battery terminals
and the contacts in the drill/driver are free from foreign objects.
CAUTION
Risk of injury. If the battery is not fitted correctly it may drop out and fall.
▶ Check that the battery is securely seated in the tool so that it cannot drop
out and fall, thereby presenting a hazard to other persons.
*2081399*
Printed: 07.01.2019 | Doc-Nr: PUB / 5174907 / 000 / 02
1
2081399
SF 2­A SFD 2-A
10.8 V 10.8 V
1.1 kg 1 kg
(2.4 lb) (2 lb)
0 /min ... 0 /min ...
400 /min 400 /min
0 /min ... 0 /min ...
1,500 /min 1,500 /min
0 Nm ... 0 Nm ...
3.5 Nm 3.5 Nm
12 Nm 12 Nm
10.8 V
−17 ℃ ... 60 ℃
(1 ℉ ... 140 ℉)
−20 ℃ ... 40 ℃
(−4 ℉ ... 104 ℉)
−10 ℃ ... 60 ℃
(14 ℉ ... 140 ℉)
English 9