Wellell Optima Prone Manual Del Usuario página 17

Optima Prone / English
5. Operation
NOTE: Always read the operating instruction before use.
5.1. General Operation
Switch the power switch on the side of the pump and press power key to turn it on.
5.1.1. Pre-set program
(1). If the pre-set program is desired, you can choose TICK and press the knob, pump will automatically.
(2). If you have preferred setting, you can choose Mode and Cycle time to enter setting.
(3). Once pump recognizes mattress size through quick connector, it will begin to inflate mattress
whichtakes around 30 minutes to complete initial inflation.
Perform pre-set program:
Mode → Alternating
Cycle time → 10 mins.
14