Lomography Lomomatic 110 Instrucciones página 13

Shooting with Flash:
If your Lomomatic 110 comes with the [16] Flash Unit, you may take flash photos
with the camera. This gives you huge benefits under low-light situations and opens
up a lot more creativity.
Attaching the flash:
• The [16] Flash Unit attaches to the side of your Lomomatic 110. To attach, line
up the flash connection and turn the [17] Flash Unit Locking Wheel downward.
• To detach the [16] Flash Unit from the camera, turn the [17] Flash Unit Locking
Wheel upward and remove the flash.
Using the flash:
• To activate the flash, simply slide the [18] Flash ON/OFF switch to either
"Day" or "Night" mode, corresponding to the aperture you've set with the [12]
Aperture Switch.
• Inserting a [19] Color Flash Filter into the [20] Color Flash Filter Slot allows
you to perform color flash photography with the Lomomatic 110.
• Switch off the flash when it's not in use to prolong the battery life.
13