V2 JET650 Manual Del Usuario página 35

CURRENT SENSOR LEVEL
1.
2.
3.
4.
5.
6.
TX KEY FLASHING N° DESCRIPTION
To correct any one of the parameters, restart from point 1.
FUNCTIONING LOGIC
WARNING: In case the photocell is connected the AUTOMA-
TIC logic can be selected; in case the photocell is not con-
nected it will work with the STEP BY STEP logic only.
The photocell TX must be connected to the proper termi-
nals for the check test 10 and 5.
1.
2.
3.
4.
Key 1
+
5 sec.
Key 2
+
5 sec.
5.
6.
TX KEY FLASHING N° DESCRIPTION
To correct any one of the parameters, restart from point 1.
STEP BY STEP LOGIC
AUTOMATIC LOGIC
FUNCTIONING
33
STEP BY STEP AUTOMATIC
LOGIC LOGIC