PRODUCT OPERATION
Use and maintenance
Using the EasySpa:
• For a front wash,
twist the handle
to the left.
• For a rear wash,
twist the handle
to the right.
• The further the handle is turned, the
higher the water pressure will be.
• To lower the water pressure, twist
the handle back towards the center.
• To turn off the bidet, return the
handle to the "OFF" position
10
Manually cleaning the EasySpa:
To clean the nozzle, pull down on
the nozzle cap and clean the nozzle
spray holes using a toothbrush or
soft cloth and mild detergent (such as
dish soap). When cleaning, be careful
not to drop or flush the nozzle cap.
Periodically tighten the nozzle cap so
it doesn't become loose with use and
cleaning.
To clean the EasySpa, use a mild
cleaner such as Simple Green or
Windex spray. Do not scrub or use
harsh, abrasive products to clean
the EasySpa, as they may scratch the
product.
Short term non-use:
If the product will not be used for
more than a few weeks, you may
consider shutting the water supply off
at the wall for extra precaution.