brondell EasySpa LES-12 Manual Del Usuario página 9

PRODUCT INSTALLATION
Installing the bidet attachment (Cont'd)
7. Connect the bidet hose to the bidet
attachment.
Connect open end of bidet hose to
the connection underneath the bidet
attachment.
Step 7
8. Turn on the water supply and check
for leaks.
a. Open the main water supply valve
slowly and check for leaks.
b. Wait 5-10 minutes, check again
and if there are no leaks, continue.
Note: If there is any leaking, check
all rubber washers and make sure
all water connections are tight and
secure. If necessary, you can use the
provided Teflon tape (plumber's tape)
for any leaking connections.
9