Publicidad
Idiomas disponibles
Idiomas disponibles
TO INSTALL ATTACHMENTS
(See Fig. 3)
Your lawn mower was shipped ready to be used as a
mulcher_ To convert to bagging or discharging:
.
Open rear door and remove mulcher plate,, Store
mulcher plate in a safe place.
=
You can now install catcher or optional clipping deflec-
tor,
•
To return to mulching operation, install mulcher plate
into discharge opening of mower,, Be sure alt tabs are
seated properly,.
CAUTION: Do not run your lawn mower
without mulcher plate in place or ap-
proved clipping
deflector
or grass
catcher in place. Never attempt to op-
erate the lawn mower with the rear door
removed or propped open.
TO ASSEMBLE
& ATTACH
GRASS
CATCHER
(See Figs. 4A & 4B)
°
Put grass catcher frame intograss bag with rigid part of
bag on the bottom,
Make sure the frame handle is
outside of the bag top.
.
Slipvinyl bindings over frameo
NOTE: If vinyl bindings are too stiff, hold them in warm
water for a few minutes. If bag gets wet, let it dry before
using.
°
Lift the rear door on the mower housing and place the
grass catcher frame side hooks onto handle bracket
hooks.
o
The grass catcher is secured to the lawn mower
housing when the rear door is lowered onto the grass
catcher frame.
MULCHER PLATE
SLOTS
TABS
FIG. 3
CATCHER
FRAME
HANDLE
FRAME
OPENING
FIG. 4A
CATCHER FRAME
REAR DOOR
HANDLE
BRACKET
HOOK
GRASS
CATCHER
NDLE
FIG. 4B
7
Publicidad
