Troy-Bilt 020210 Manual Del Propietário página 6

ASSEMBLY
mMPORTANT: Read entire owner'smanuaH beforeyou
attempt to assembHeor operate your new pressure washen
Remove Pressure 4asher From
Remove high pressure hose_ handHe_and parts box
incHuded with pressure washer.
SHicetwo corners at end of carton from top to bottom
so paneH can be folded down fiat, then remove aHH
pacHdng material
RoHH pressurewasher out of carton.
Carton Contents
[terns in the carton include:
Main unit
High pressure hose
Spray gun with qock connect fitthlg
Nozzle extension with qock connect fitting
HandHe
Engine oil
Safety goggles
Parts Bag OncHudes the foHHowing):
Owner's registration card
Bag containing 5 muHti-coHored quick connect
spray tips
Owner's manual
Engine manual
Engine warranty card
Emissions control warranty card
Handle Fastening Hardware Kit (which includes):
Carriage
Bolts (2)
PHastic Knobs (2)
ff any of the above parts are missing or damaged_ caHH the
pressure washer heHpHineat i =888=6 i i =6708.
PREPARING PRESSURE
WASHER FOR USE
If you have any probHems with the assembHy of your
pressure washer or if parts are missing or damage& caHH the
pressure washer heHpHine at i -888-6 i i -6708.
To prepare
your
pressure washer
for operation, you
wii[ need to perform these tasks:
I. Fill out and send in registration card.
2. Verify oil dipsticl< has been installed into pump (Figure I).
3. Attach handle to main unit.
4. Add oiH to engine.
5. Add fuel to fuel tank.
6. Connect high pressure hose to spray gun and pump.
7. Connect water supply to pump.
8. Connect nozzHe extension to spray gun.
9. SeHectand instaHH desired quick connect spray tip.
0