EN
11
OPERATION
Charge in a well-ventilated area. Do not block charger
vents. Keep them clear to allow proper ventilation.
11.1
LED ON BATTERY
Press the power button (8) to activate the LEDs– the display
(9) goes off automatically after 5 seconds. The acoustic signal
must sound briefly when the button is pressed (to confirm
function) – see also "Acoustic Signal".
The display (13) will indicate the battery capacity.
If the fault LED Indicator (10) glow continuously / flash, and
the display (9) will show the fault code as below:
E0
BMS fault
E1
Over-current (discharging)/(charging)
E2
Communication fault (with charger or external
tools)
E3
Over-voltage of cell
E4
Low-voltage of cel
E5
Bad consistency of cell
E6
The external devices steal power
HI
Over temperature of battery
Lo
Low temperature of battery
11.2
ACOUSTIC SIGNAL
This signal is activated by pressing the button (8) on the
battery.
A
Short beep
B
Short beep once
every 10 sec
CAUTION
NOTE
NOTE
Acoustic signal works as it
should.
The battery is less than 20%
capacity.
English
C
Short beep once
every 0.5 sec
11.3
ADJUST THE HEIGHT
To get a digital version of the user manual or to get more
product information,scan the QR code (12) at the backside
of the harness.
The lock button (14) is to release the backpack battery.
1. Push inward the lock button (13).
2. While pushing the lock button (13), move the lock button
(13) up or down to adjust the height.
3. Release the lock button (13) once the desired height is
set.
11.4
CONNECT WITH APP (FOR
BATTERY WITH BLUETOOTH)
This App can provide remote battery locking/ unlocking, a
battery locate feature, a battery serial number, a battery
firmware, a battery temperature, a battery charger, mode
repairing and firmware updating.
•
The APP is governed by separate terms and conditions
available for viewing through the mobile application.
Download the application at:
https://appinstallation.globetools.systems?
brand=greenworks
•
Follow the instructions in the app to create your account.
If the connect time is more than 30 seconds, please repress
the battery indicator button to activate the battery again.
8
Malfunction in battery.
NOTE
NOTE
APP ( Android,IOS)
NOTE