Descargar Imprimir esta página

Snapper 285Z Serie Manual Del Operador página 29

Unidad cero giro y cortacésped de 52 pulg
Ocultar thumbs Ver también para 285Z Serie:

Publicidad

Idiomas disponibles

Idiomas disponibles

Engine:
briggs & stratton
Model
Professional Series
Horsepower
26 Gross HP @ 3500 rpm
Displacement
44.0 cu in. (724 cc)
Electrical System Battery 12 Volt, 230 CCA
Alternator 16 amp
Oil capacity
64 oz (1,9 L) w/Filter
chassis:
fuel Tank
Capacity: 2.4 Gallons (9,1 L)
Rear Wheels
Tire Size: 18 x 9.50-8
Inflation Pressure: 15 psi (1,03 bar)
front Wheels
Tire Size: 11 x 4.00-5
Inflation Pressure: 25 psi (1,72 bar)
Power Rating
The gross power rating for individual gasoline engine models is labeled in accordance with SAE (Society of
Automotive Engineers) code J1940 Small Engine Power & Torque Rating Procedure, and is rated in accordance with
SAE J1995. Torque values are derived at 2600 RPM for those engines with "rpm" called out on the label and 3060
RPM for all others; horsepower values are derived at 3600 RPM. The gross power curves can be viewed at www.
BRIGGSandSTRATTON.COM. Net power values are taken with exhaust and air cleaner installed whereas gross
power values are collected without these attachments. Actual gross engine power will be higher than net engine
power and is affected by, among other things, ambient operating conditions and engine-to-engine variability. Given
the wide array of products on which engines are placed, the gasoline engine may not develop the rated gross power
when used in a given piece of power equipment. This difference is due to a variety of factors including, but not limited
to, the variety of engine components (air cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), applica-
tion limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-engine variability. Due
to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for this
engine.
Parts and accessories
See an authorized dealer.
en
Transmissions:
Make
, V-Twin
Model
TM
Type
Hydraulic fluid
Speeds
@ Specified rpm
Dimensions:
Overall Length
Overall Width
Height
Weight (approx.) 554 lbs (252 kg)
Specifications
Hydro Gear
ZC-AHBB-2A7B-1DPX (LH)
ZC-DHBB-2A7C-1DPX (RH)
EZT
Sealed Unit
Forward: 0-6 MPH (0-9.66 km/h)
Reverse: 0-3 MPH (0-4.83 km/h)
75" (191 cm)
61" (155 cm)
39" (99 cm)
29

Publicidad

loading

Este manual también es adecuado para:

78007657800765-01