SECONDARY AIR REGULATION LEVER POSITION FOR NOMINAL POWER, OPEN 50% OF ITS RANGE.
NOTE:- FOR MODELS KRONOS 60 AND RK-60, OPEN THE SECONDARY AIR REGULATION LEVER 25% OF ITS
RANGE.
In order to avoid burns, always use the glove supplied with the apparatus when opening the
door and using the adjustment lever.
3. 8 Tips for using your KRONOS cassette and OPTIMAL adjustment of the air
intakes:
Once the unit has completed a first combustion cycle and it is hot enough, it is advisable to follow these
instructions to get the most out of your product.
Spread the embers from previous combustion cycles across the bottom of the burner.
It is preferable to use opened beech or similar wood with a humidity percentage of less than 20%.
Recommended fuel size
Mod. Kronos 60:
one piece of Wood between 30 and 40 centimeters in length and of a weight of 1 to
1'5 kg.
Mod. Kronos 70:
one piece of wood between 30 and 45 centimeters in length and of a weight of 1 to
1.8 kg.
Mod. Kronos 80:
one piece of wood between 40 and 55 centimeters in length and of a weight of 1.25
to 2.1 kg.
Mod. Kronos 100:
one piece of wood between 45 and 65 centimeters in length and of a weight of 1.6 to
2.5 kg
Adjust the primary air inlet to an opening of between 5 and 8 mm. For models KRONOS 60 and RK-60,
close the primary air regula on 100% of its range)
Adjust the secondary air inlet to halfway, i.e. at an angle of approximately 90º with the front of the device.
For models KRONOS 60 and RK-60, open the secondary air regula on lever 25% of its range)
To obtain stable and optimal performance and a clear view of the flames through the glass try to make
consecutive loads of wood with pieces as similar as possible, for that you must keep the same air inlet
regulation at any time.
33