Publicidad
Idiomas disponibles
Idiomas disponibles
Installation and removal of wheels
Round holes
Round axis
Square holes
Square axis
Wheel removal: Press and hold the square button
on the round tube above the wheel, then remove it.
3
Step 2.
-To attach the front wheels, insert
the round axles into the holes under
the handlebar. Do this on both
sides.
-Ensure they are secure by pulling
and confirming they do not come
out.
-Do the same for the two rear
wheels, inserting the square axles
into the holes under the round tube.
-Ensure they are secure by pulling
and confirming they do not come
out.
-Ensure the wheels are properly
orientated.
Square keystroke
Publicidad
