Gloria FineCut 230V Instrucciones De Uso página 26

3 Before using the appliance
This chapter contains information
about the delivery status.
3.1 Delivery status
The appliance is shipped as standard as
follows:

Appliance

1 x Allen key (3 mm)

1 x user manual and product inform a -
tion
Any accessory parts are individually
packed.
4 Technical data
Item number(s):
Voltage:
Output:
Cutting width:
Height adjustment:
Max. stroke rate:
Weight of appliance:
Protection class:
Noise/Vibration Information:
Typically the A-weighted noise levels of the product is:
- LpA 83,0 dB(A); Uncertainty KpA = 3,0 dB (A)
- LwA 91,0 dB(A); Uncertainty KwA = 3,0 dB (A)
Vibration total values ah ≤ 2,5 m/s2, K = 1,5 m/s2
INFORMATION
That the declared vibration total value has been measured in accordance with a standard test
method and may be used for comparing one tool with another; That the declared vibration
total value may also be used in a preliminary assessment of exposure.
WARNING
That the vibration emission during actual use of the power tool can differ from the declared
total value depending on the ways in which the tool is used; and of the need to identify safety
measures to protect the operator that are based on an estimation of exposure in the actual
conditions of use (taking account of all parts of the operating cycle such as the times when
the tool is switched off and when it is running idle in addition to the trigger time).
5 Unpacking
Figures 1a - 1b
1a 1b
- Your
pre-assembled and must be
assembled appropriately.
3.2 Elements of the appliance
A Ergonomic handle
B
C
D On/Off safety switch
E
F
G Angle adjustment
H Blade set consisting of lower blade
I
J
001320.0000
230 VAC / 50 Hz
40 Watt
250 mm
30 / 40 / 50 mm
1.100 strokes per min.
approx. 2.7 kg
II
6
Figures 2 - 5
is supplied
26
Switching-on lock
Cable strain relief
Upper tube screw connection
Lower tube screw connection
with 2 fitted upper blades)
Blade guard
Wheel mounting holes for height
adjustment
Assembling the grass shear
WARNING
RISK OF CUTTING INJURY
FROM SHARP / POINTED
METAL BLADE BARS!