Worx Nitro WG286E Manual Original página 11

Li-Ion battery This product has been
marked with a symbol relating to
'separate collection' for all battery
packs and battery pack. It will
then be recycled or dismantled in
order to reduce the impact on the
environment. Battery packs can be
hazardous for the environment and
for human health since they contain
hazardous substances.
Keep hands away from blade
Remove battery from the socket
before carrying out any adjustment,
servicing or maintenance.
Wear protective gloves.
Waste electrical products must not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your local authorities or
retailer for recycling advice.
2. COMPONENT LIST
1. ROTATING REAR HANDLE
2. POWER INDICATOR LIGHT
3. BATTERY PACK*
4. FRONT HANDLE
5. OPERATOR PRESENCE SWITCH
(All Around Switch Function)
6. SAFETY GUARD
7. BLADE
8. BLADE SHEATH
9. LOCKING SWITCH FOR ROTATING
10. THROTTLE TRIGGER
11. HEDGE SWEEPER*
12. BATTERY PACK RELEASE BUTTON* (See
Fig. G)
*Not all the accessories illustrated or described
are included in standard delivery.
40V Cordless Hedge Trimmer EN
3. TECHNICAL DATA
Type WG286E WG286E.X (250-299- designation
of machinery, representative of cordless hedge
trimmer)
Voltage 40V
No-load speed
Blade length
Cutting length
Tooth spacing
Max cutting diameter
Machine Weight
(Bare Tool)
** X=1-999, A-Z, M1-M9 there are only used for
different customers, there are no safe relevant
changes between these models
*** Voltage measured without workload. Initial
battery voltage reaches maximum of 20 volts.
Nominal voltage is 18 volts.
SUGGESTED BATTERIES
AND CHARGERS
Category Type
WA3551
20V Battery
WA3639
WA3772
20V Charger
WA3883
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to
the accessory packaging for further details. Store
personnel can assist you and offer advice.
WG286E WG286E.X**
MAX(2x20V MAX.)***
3400 /min
61 cm
58 cm
33 mm
27 mm
2.7 kg
Capacity
2.0 Ah
2.0 Ah
2.0 A
4.0 A
11