Publicidad
Idiomas disponibles
Idiomas disponibles
5.10 Connection to the air recirculation system
1.
Mount the carbon filters for odors (code: TCF1) - optional accessory
2.
Attach the air exhaust tube to the hood connection (optional accessory)
3.
Make the connection to the hole in the built-in furniture.
4.
Fix the exhaust grille to the built-in furniture in such a way that its
connection fits into the exhaust pipe.
5.
Seal the joints.
5.11 Making the electrical connection
Insert the plug into the socket with protective contact.
5.12 Unit Disassembly
WARNING - Risk of injury!
Careful! All operations must be performed with the cooker hood disconnected from
electricity and only by a professional and authorized technician.
Components inside the unit may have sharp edges.
Wear protective gloves.
Disconnect the unit from the mains power supply.
Undo the air exhaust tube.
If necessary, open the filter cover (for models with this cover)
6. USE AND FUNCTIONS
CAREFUL! LED lamps must not be covered with thermal insulation or other materials.
NOTE! Only turn on the LED lights while the hood is running. Do not turn on the lights to
illuminate the room. Do not touch the LED lamps within 30 minutes after use
units.
6.1 Control panel
Via the operating elements you set all the functions of your unit and receive information
about the operating status.
Fan on/off button
LED Lighting On/Off button
Fan speeds buttons (low/ medium/ high)
Boost button
Reminder function for changing the carbon filter/cleaning the grease filter
WIFI Button
Air cleaning function button
EN
24
Publicidad
