Giatsu AROMA 2E GIA-MSI-09AR2ER32 Manual Instalación página 56

INSTALLATION MANUAL
6. REFRIGERANT TUBE CONNECTION
6. After connecting the copper tubes to the indoor unit, wrap the power cable, signal cable and pipe with
adhesive tape.
NOTA: NO entrelace el cable de señal con otros cables. Mientras agrupa estos elementos, no entrelace ni
cruce el cable de señal con ningún otro cableado.
7. Pass this pipe through the wall and connect it to the outdoor unit.
8. Insulate all pipes, including outdoor unit valves
9. Open the shut-off valves of the outdoor unit to start the flow of refrigerant between the unit interior
and exterior.
CAREFUL
Make sure there are no refrigerant leaks after completing the installation work. If there is a refrigerant leak,
ventilate the area immediately and remove the system (see the Air Removal section of this manual).
54

SPLIT 1X1 AROMA 2E