Descargar Imprimir esta página

InfiRay FINDER Guia De Inicio Rapido página 15

Publicidad

Idiomas disponibles

Idiomas disponibles

If the device or the power unit has been damaged, send the
l
device to our after-sales service for repair.
Before using this product in an environment with water,
l
ensure that the Type C cover is tightly covered.
Safety instructions for the power supply unit
Only use the battery charger to charge the battery pack
l
included in the package.
Check the power supply unit, cable and adapter for visible
l
damage before use.
Do not expose the battery pack to high temperature or open
l
flame. Do not use the power unit in wet or humid
environments.
Do not charge the battery immediately after you bring it from
l
the cold to the warm. Wait 30 to 40 minutes for it to warm up.
Do not use the charger if it is modified or damaged. Do not
l
make any technical modifications to the power unit.
Do not disassemble or modify the battery pack or charger
l
without professional instructions. Do not knock or drop the
battery pack.
Only charge the battery pack at a temperature range of 0°C ~
l
+45°C. Otherwise the battery life will be significantly reduced.
When charging, please don't leave the battery unattended.
l
Do not charge the battery for more than 24 hours after it is
l
already fully charged.
Before a long storage time, the battery pack should be
l
partially charged, not fully charged or discharged.
The battery pack has short circuit protection. But situations
l
that may lead to short circuits should be avoided.
Please keep the battery pack out of the reach of children.
l
ENGLISH
11

Publicidad

loading