4.
and exterior), such as door & window casing, door
jambs, baseboard, crown molding, cabinetry, cap and
shoe molding, molding, staircases, door & window
paneling, furniture, etc..
Before using the tool, read the
instruction book carefully.
pack
Charging the battery pack
Installing the belt hook
The belt hook can be
installed on the left or right side
of the nail gun.
Loading the tool with brad nails
1. Remove the battery pack if
installed.
2. Squeeze the magazine release
button located on the rear of
the magazine and slide the
magazine cover open
3. Place brad nails in the upper
left corner of channel
4. Push the magazine cover
closed until it securely snaps
into place, you may now reinstall
battery pack
Use safety
gloves. Keep the tool
pointed away from yourself and
others when loading nails.
Failure to do so could result in
possible serious personal injury.
20V Cordless 18 Gauge Brad Nailer
Single sequential actuation
mode: Provides accurate nail
placement
Contact actuation mode: Allows
for fast repetitive nail placement
if the selector is not securely
seated in either position. Always
assure the selector is seated
properly to avoid an unexpected
nail discharge and possible
serious personal injury.
Single sequential actuation
-Push the workpiece contact
trigger
the workpiece contact.
-Squeeze and hold the trigger.
See Fig. A1, A2
Push the tool against the
work surface to depress the
See Fig. A3
workpiece contact and drive a
nail.
-Release the workpiece contact
once after each nailing action.
-Move the tool and then push the
See Fig. B
workpiece contact again.
off trigger and pushing the work
piece contact against the work
surface simultaneoulsly
action within 5 seconds after
pushing the workpiece contact,
workpiece contact once and
See Fig. C1, C2
then operate again.
hold back the workpiece contact
mechanism during operation of
the tool. Doing so could result in
possible serious injury.
The nail gun
will not function properly
The nail gun will operate
If there is no nailing
Never wedge or
See Fig. D
11
See Fig. E1, E2
EN