Pool Technologie DUO Instrucciones De Uso página 44

3.8. Safety devices
3.8.1. Overwintering mode
Overwintering mode is deactivated by default.
The overwintering mode can be activated from the alarms menu and allows for stopping chlorine production
when the swimming pool temperature is below 15°C.
When overwintering mode is on:
o It displays instantly on the screen.
o Overwintering mode starts and stops automatically.
3.8.2. Alarms and alerts
DEFAULT
CONFIGURATION
ALARMS
Activated
ALERTS
* The corresponding alarm or alert is maintained while the detected fault remains in place, and the corresponding
message reappears a few moments after dismissal.
IMMEDIATE AUTOMATIC
MESSAGE
DISPLAYED/FAULT
DETECTED
Production pH regulation
AUTOMATIC OPERATION(S)
UPON ACTIVATION
Message
displayed
STOP
No Yes
Yes No
Immediate stop of production
and/or pH regulation
Yes
No
POSSIBLE
VERIFICATIONS AND SOLUTIONS
CAUSE
pH corrector
Replace the pH corrector container.
container empty
Check that:
- the cell is not scaled.
- the electrical connections to the
terminals of the cell are
sufficiently tight and not oxidised.
Cell problem - check that the cell's power cable
is in good condition.
- the power cable plug for the cell
is connected to the electronic
unit.
As a last resort, replace the cell.
Check that the brine pump is
Insufficient salt operating correctly.
level
Check that there is sufficient salt in
the brine tank.
Problem with
the electronic Contact a professional.
unit power card
DISMISSAL*
Press the OK or button (press
or press and hold, depending on
whether it is alarm or alert).
OPTION TO
DEACTIVATE
MENU
Yes
No
19