Descargar Imprimir esta página

ST HT 20 Li B Manual De Instrucciones página 130

Cortasetos portátil con alimentación por batería

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 143
h) Keep handles and grasping surfaces
dry, clean and free from oil and grease.
Slippery handles and grasping surfaces do
not allow for safe handling and control of the
tool in unexpected situations.
5) Battery tool use and care
a) Recharge only with the charger specified
by the manufacturer. A charger that is
suitable for one type of battery pack may
create a risk of fire when used with another
battery pack.
b) Use power tools only with specifically
designated battery packs. Use of any other
battery packs may create a risk of injury and
fire.
c) When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects, that can make a
connection from one terminal to another.
Shorting the battery terminals together may
cause burns or a fire.
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
e) Do not use a battery pack or tool that is
damaged or modified. Damaged or modified
batteries may exhibit unpredictable behaviour
resulting in fire, explosion or risk of injury.
f) Do not expose a battery pack or tool to
fire or excessive temperature. Exposure to
fire or temperature above 130 °C may cause
explosion. NOTE The temperature „130 °C"
can be replaced by the temperature „265 °F".
g) Follow all charging instructions and do not
charge the battery pack or tool outside
the temperature range specified in the
instructions. Charging improperly or at
temperatures outside the specified range may
damage the battery and increase the risk of
fire.
6) Service
a) Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained.
b) Never service damaged battery packs.
Service of battery packs should only
be performed by the manufacturer or
authorized service providers.
2.2 SPECIFIC SAFETY REGULATIONS
FOR HEDGE TRIMMERS
a) Keep all parts of the body away from the
blade. Do not remove cut material or hold
material to be cut when blades are moving.
Blades continue to move after the switch
is turned off. A moment of inattention while
operating the hedge trimmer may result in
serious personal injury.
b) Carry the hedge trimmer by the handle
with the blade stopped and taking care not
to operate any power switch. Proper carrying
of the hedge trimmer will decrease the risk of
inadvertent starting and resultant personal
injury from the blades.
c) When transporting or storing the hedge
trimmer, always fit the blade cover. Proper
handling of the hedge trimmer will decrease
the risk of personal injury from the blades.
d) When clearing jammed material or
servicing the unit, make sure all power
switches are off and the battery pack is
removed
or
actuation of the hedge trimmer while clearing
jammed material or servicing may result in
serious personal injury.
e) Hold the hedge trimmer by insulated
gripping surfaces only, because the blade
may come in contact with hidden wiring.
Contact between cutter blades and a "live"
wire may cause exposed metal parts of the
tool to become "live" and give the operator an
electrical shock.
f) Keep all power cords and cables away
from cutting area. Power cords or cables may
be hidden in hedges or brushes and can be
accidentally cut by the blade.
g) Do not use the hedge trimmer in bad
weather conditions, especially when there
is a risk of lightning. This decreases the risk
of being struck by lightning.
h) During work operations, always hold the
machine firmly with both hands. Operating it
with only one hand can cause loss of control
and serious personal injury.
If something breaks or an accident
occurs during work, turn off the motor
immediately and move the machine away to
prevent further damage; if an accident occurs
with injuries or third parties are injured, carry
out the first aid measures most suitable for
the situation immediately and contact the
medical authorities for any necessary health
care. Carefully remove any debris which
could cause damage or injury to persons or
animals if ignored.
EN - 3
disconnected.
Unexpected

Publicidad

loading