Toyotomi zibro RS-22 Instrucciones De Uso página 10

I
TRANSpORTATION
Take the following measures to avoid fuel leakage during the transportation of
the heater:
1 Let the heater cool down.
2 Remove the removable tank  from the heater and remove the fuel
acceptance fitting (Fig. P). Some drops may leak from the fuel acceptance
fitting; keep a cloth at hand. Store the fuel acceptance fitting and the
removable tank outside the heater.
3 Place the transportation cap into the position of the fuel acceptance fitting
(Fig. Q).
Press it tight.
4 Always move the heater in an upright position.
J
SpECIFICATIONS
Ignition
Fuel
Capacity (kW) *
) **
Suitable space (m 3
Fuel consumption (l/hr) *
Fuel consumption (g/hr) *
Burning time per tank (hr) *
Capacity removable tank (litres) 4.0
* At maximum setting
** Specified values are indicative
K
WARRANTY pROVISIONS
Your heater comes with a 48 months warranty starting on the date of purchase.
Within this period all defects in material or workmanship will be repaired without
any charge. The following provisions shall apply regarding this warranty:
1 We expressly dismiss all other claims for damages, including consequential
damages.
2 Any repairs or replacements of components within the term of warranty will
not result in an extension of the term of warranty.
3 The warranty will no longer apply, when the heater has been modified,
non-original parts have been used, or when it is repaired by third parties.
4 The warranty will not apply to parts that are subject to normal wear, such as
the batteries, the ignition coil, the wick and the manual fuel pump.
5 The warranty will only apply, when you present the original, dated proof of
purchase, provided no changes have been made to it.
6 The warranty will not apply to damages caused by actions not in compliance
with the Directions for Use, neglect, and the use of an incorrect type of fuel,
or fuel past its use-by date. The use of incorrect fuel can even be dangerous*.
7 Transportation costs and the risks involved during the transportation of the
heater or heater components will always be the responsibility of the
purchaser.
4
10
electrical Dimensions (mm)
paraffin (including base plate) depth
2.20
35-80 Accessories:
0.229 Required batteries
183
17.5 Wick type
Weight (kg)
width 422
281
height 446
transportation cap
4x LR14, MIN 1400
1.5V, size C
F
7.5
P
Q
Transportation cap