On-Site Window Contact Switch - GUTMANN FONDA 2840/41 ML 830 Instrucciones De Montaje

9. FITTING INSTRUCTIONS
11.
Electrical connection to be carried out by qualified personnel
12. Carry out function test!
Commissioning
After the field has been installed and the
supply voltage has been applied (mains
connection), a self-test of the controller is
carried out first and service information for
customer service is provided.
is displayed.
Important: There must be no objects on
the Touch-Control sensor keys for the
mains connection!
10. CONTACT WITH WINDOW SWITCH ( exhaust air operation )
Contact closed !
Extractor hood operation only with
Opened window or
Supply air duct possible
Please note that your gas boiler or open fireplace will produce exhaust gases through
convection of the heated exhaust air from your living spaces to the outside.
Your exhaust fume extraction works by forced convection and therefore causes
a negative pressure in the living space, which sucks in the exhaust gases and/or the
exhaust gases of their house co-inhabitants from the chimney brings back.
Contact opened !
Operation with closed window
deactivated if suction from
Exhaust emission possible
( e.g. by gas heating or open chimney )
EN
65