Publicidad
Idiomas disponibles
Idiomas disponibles
ENG
Thank you for choosing Deltaco!
1. Light sensor
2. Camera lens
3. Micro USB port
4. Infrared sensor
5. Microphone
6. LED
7. Doorbell button
8. MicroSD slot
9. On/off button
10.Reset button
11.Speaker
Mounting
The batteries are built-in into the cam-
era. The batteries will charge via the
USB connection.
1. Mount the back cover to the wall with
screws (included).
2. Connect the Micro USB cable to
ensure there's power during the pairing
process
3. Install MicroSD card (not included).
4. Reset the doorbell (see reset)
5. Follow the install and use instruc-
tions
6. Mount/hang the doorbell onto the
back cover.
LED
Red = the camera is just turning on or
there is something malfunctioning.
Flashing red = waiting for WiFi con-
nection.
Flashing red fast = connecting to WiFi.
Flashing blue = connecting to internet.
Blue = connected.
Reset
Press and hold the reset button for
about 5 seconds.
6
Install and use
1. Download and install the app "Delta-
co smart home" from Apple App Store
or Google Play Store on your mobile
device.
2. Launch the app "Deltaco smart
home".
3. Create a new account or log in to
your existing account.
4. Tap "+" to add the device.
5. Choose category and then the type
of product from the list.
6. Connect the device to power.
7. If the LED/lamp does not flash: Reset
the device.
If the status indicator flashes: Confirm
in the app.
8. Confirm the Wi-Fi network and
password.
9. Enter the device name.
Cleaning and maintenance
Do not use cleaning solvents or
abrasives.
Do not clean the inside of the device.
Do not attempt to repair the device. If
the device does not operate correctly,
replace it with a new device.
Clean the outside of the device using
a soft cloth.
Support
More product information can be
found at www.deltaco.eu.
Contact us by e-mail: help@deltaco.eu.
Publicidad
