Maintenance And Repair - Clarke American Sanders CAV8 Manual Del Operador

ENGLISH
EN

MAINTENANCE AND REPAIR

CAUTION: Before cleaning and servicing
the machine, always remove the
power cord.
Carry out only maintenance operations described in
these operating instructions. Use only original Clarke
service parts.
CAUTION: Do not make any technical
modifications to the machine.
Your safety could be endangered
as a result!
For all other maintenance and
repair work, please contact an
authorized service department.
Replacing the Filter Element (see figure 5)
1. Remove the upper section of the cleaner from the
dirt tank and deposit with the filter element facing
upwards. do not place the upper section of the
cleaner on the guard (1).
2. Turn the filter holder counterclockwise (2) and
remove it (3).
3. Carefully remove the filter element.
4. Clean the filter seal (4). Check it for damage and
replace if necessary.
5. Check antistatic clamp (5) for damage and have it
replaced by Clarke Service if necessary.
6. Check the floater (6) for proper operation: When
you turn the filter holder, the floater should move
back fand forth easily.
7. Fit a new filter element.
8. Fit the filter holder and turn it clolckwise to secure
it.
9. Dispose of the used filter element in accordance
with legal regulations.
CAUTION: Never use the vacuum cleaner
without a filter.
-6-
Figure 5
®
Clarke American Sanders Operator's Manual (EN) - CAV 8