Publicidad
Idiomas disponibles
Idiomas disponibles
AXF-240
AMPLIFIER
5. CONNECTION
5.1. AC MAINS CONNECTION
Please, make sure that AC mains match with equipment voltage specifications.
Use the equipment power cord to connect it to AC mains.
The unit is factory set to be supplied from 115 to 230 Vac 50/60 Hz. Voltage switching is automatic.
For your own safety never disconnect or disable the grounding of any equipment.
If the outlet doesn't have ground connector, you must use an adapter to ground the third cable
properly. In order to prevent electrocution or fire, make always sure that the amplifier and all
associated equipment are properly grounded.
5.2. FRAME TO GND LINK
This amplifier includes a frame to ground link switch. A single frame to
ground link should exist in the installation; in other case ground noise could
appear. Place the switch in the GND position (default) to join frame and
ground or in the LIFT position to separate them.
AXF-240_Manual_ENG_V1.0
Page 6 of 16
Publicidad
