Publicidad
Idiomas disponibles
Idiomas disponibles
6.4 Stopping the Unit
Press
6.5 Boost speed setting
Hold the key
until the button flashes and the boost level is on,
the unit will now run at full power for 5 minutes. After 5 minutes you will hear a
warning beep and the speed will immediately return to level 3. To disable the boost level
before the time expires, short press the key
6.6 Timer setting
Press the key
and the key
minute countdown begins. After 5 minutes a warning beep will sound and all button lights
will turn off. The unit's motor and lighting will automatically turn off. After this, the unit will
continue to beep for 5 seconds if there is no other operation, the beep sound can be stopped
by pressing any button during this beep. Users can stop this 5-minute countdown feature at
any time during the countdown by simultaneously pressing the keys
6.7 Connecting and disconnecting the lighting system
You can activate or deactivate the lighting system independently of the ventilation system.
to turn on.
Press
7. ACCESSORIES
You can purchase accessories from local partners/online stores. Use only original accessories
specifically designed for your unit model. Accessories are designed specifically for the unit.
To find out which accessories are suitable for your unit, consult the catalog or our website
www.turbionaire.com
Accessory
Grease filters (1 pc.)
TCF1 carbon filter kit (2 pcs.)
TAD1ACC air deflector kit
8. TROUBLESHOOTING
Minor faults can be fixed by yourself. Before contacting the service center, consult the
troubleshooting information. This way you avoid unnecessary expenses.
WARNING - Risk of injury!
Improperly executed repairs are dangerous.
Only specialized personnel have the right to repair the unit.
If the unit is defective, notify the authorized service center.
WARNING - Danger of electric shock!
Improperly executed repairs are dangerous.
Only specialist personnel are allowed to carry out repair work on
unit level.
Only original spare parts must be used when repairing the unit.
If the power cord of this unit becomes damaged, it must be replaced by a qualified and
trained person.
simultaneously until the power button flashes and a 5-
Press
again to turn off
EN
The unit will return to level 3.
Product code
TAF13SS (Chef 50 built-in pro)
TAF10SS (Chef 75 built-in pro)
TCF1
TAD1ACC
27
again
Publicidad
