Publicidad
Idiomas disponibles
Idiomas disponibles
4. Connect the regulator and hose to the pizza oven.
WARNING:
•
Always keep the gas bottle in an upright position.
•
If the appliance is not in use, turn OFF the gas at the supply cylinder.
•
The cylinder used must include a collar to protect the cylinder valve.
•
Maintain a minimum distance of 1m between the appliance and the gas tank.
GAS FITTING INSTRUCTIONS
This gas fitting is clockwise. Ensure that the tank is completely switched off,
then screw the regulator as far as possible into the gas tank valve.
CONNECTING THE LIQUID PROPANE GAS CYLINDER
1. To connect the liquid propane gas cylinder:
2. Ensure the cylinder valve is in the OFF position.
3. Confirm that the burner valve is in the OFF position.
4. Inspect the valve connections, port, and regulator assembly.
Remove debris and examine the hose for damage.
5. When connecting the regulator assembly to the valve, hand-tighten the nut
clockwise until it stops. Using a wrench could damage the quick coupling
nut and lead to a hazardous situation.
6. Fully open the cylinder valve by turning it counterclockwise.
7. Before lighting the oven, use a soap and water solution to check all
connections for leaks.
8. If a leak is found, turn the cylinder valve OFF, and do not use the oven until
a local liquid propane dealer can make repairs.
8
www.NutriChefKitchen.com
Publicidad
