Publicidad
Idiomas disponibles
Idiomas disponibles
H. Bottle holder
I. Set with dummy
J. Charging cable
K. Lid for bottle
04. DISPLAY ICONS
FIG. 2
1. Power button (B) - Hold down the button for 2 seconds to turn the unit
on or off.
2. Mode Change Button (H) - Press the button to change the mode of the unit.
There are 3 modes of the unit available (stimulation, collection, milking).
The unit will automatically switch from stimulation mode to milk-out mode
after 2 minutes.
3. Changing the suction level - Press „+" (G) to increase the suction power or
„-" (A) to decrease the suction power. (Stimulation mode (C): levels L1-L9;
Deep suction mode (D): levels L1-L9; Mixed mode (C): levels L1-L9).
4. Battery status (F) - The battery icon shows the battery charge status. Connect
the device to charge when the battery is close to empty.
5. Device run time (J) - This indicator shows how many minutes have passed
since the breast pump was switched on. The device will automatically switch
off after 30 minutes.
6. Suction level (I) - Shows the currently selected suction power level.
05. CLEANING AND DISINFECTION
Washing and disinfecting are two different operations. They must be done separa-
tely to protect your baby and to ensure the correct operation of the breast pump.
Washing - washing the surface of the unit and removing dirt.
Disinfection - killing organisms such as bacteria or viruses that may be present on
the surface of the equipment.
Funnel and funnel lid, breast pump parts (joint, gasket, gasket cover), bottle
and teat:
Wash and disinfect before first use.
Wash after each use.
Disinfection once a day.
NOTE:
- Separate and wash all machine parts that come into contact with milk immedia-
tely after using the machine. This will remove any milk residue and prevent the
growth of bacteria.
- Use only drinkable tap water for washing. Use bottled water if the water in your
tap does not meet this requirement.
- When cleaning the valves, do not use brushes. Be careful not to puncture the
14
Publicidad
