EarthQuaker Devices Zoar Guia De Inicio Rapido página 6

FREQUENCY RESPONSE
Snapshot of frequency response with all controls set at noon.
FLEXI-SWITCH TECHNOLOGY
®
This device features Flexi-Switch Technology! This
relay-based, true bypass switching style allows you
to simultaneously use momentary and latching-style
switching.
• For standard latching operation: Tap the footswitch
once to activate the effect and then tap again to bypass.
• For momentary operation: With the effect off, hold the
footswitch down for as long as you'd like to use the effect.
Once you release the switch, the effect will be bypassed.
Since the switching is relay-based, it requires power to
pass signal.
6
POWER REQUIREMENTS
Current Draw .................... 10 mA
This device takes a 9-18 volt DC power supply with
a standard 2.1mm negative center barrel plug. We
recommend using a pedal-specific, transformer-
isolated, wall-wart power supply or a power supply with
multiple isolated-outputs. Pedals will make extra noise if
there is ripple or unclean power. Switching-type power
supplies, daisy chains and non-pedal specific power
supplies do not always filter dirty power and may result
in unwanted noise.
DO NOT POWER THE ZOAR HIGHER THAN 18V!
TECH SPECS
Input Impedance ................ 1 MΩ
Output Impedance ........... <10 kΩ
ARTWORK
Artwork by Dave Neeson.
WARRANTY
This device has a limited lifetime warranty. If it breaks,
we will fix it. Should you encounter any issues, please
visit www.earthquakerdevices.com/support.