Pool Technologie Poolsquad iPO Ampero 8 Instrucciones De Uso página 39

3.7.12. Selecting the electrolyser operating mode
Possible
Menu
settings
OFF
3.7.13. Setting the production setpoint
Electrolyser
operating mode
CL
% Default display
3.7.14. Sensor configuration
Menu Sensor
Cover/Ext command
Flow/pH container
Temperature
Ext command: external command.
pH container: empty container sensor.
Type: this parameter does not appear if the corresponding mode is set to OFF.
ON: sensor activated.
OFF: sensor disabled.
NO: switch normally open.
NC: switch normally closed.
Regulation of production using the
CL amperometric probe, according to the
FCL and production setpoints
Continual production, as per the
%
production setpoint
Turning the electrolysis function off
Menu Specific instructions
Directly select a value
using the
confirmation required)
Setting
Mode
Type
Mode
Type
Meaning
- From 10 to 100%, in steps of 1%
buttons (no
From 10 to 100%, in increments of
Possible settings
-
Viewable indicator
depending on the default
display
or
or
or
Possible settings
OFF (i.e. 0%),
1%.
Cover
OFF
Ext control
NO
NC
OFF
pH container
Flow
NO
NC
ON
OFF
Default
setting
FCL
Default
setting
100%
Default setting
Cover
NO
OFF
NO
ON
14